A102 Dual T1/E1/J1
  English View Demo

PDF PDF version available in:
English English Français Français
Español Español
維基百科語言列表 維基百科語言列表
Deutsch Deutsch Italiano Italiano Português Português Tiếng Việt Tiếng Việt

 AFT card (PCI and PCI Express)
 
Version Interface Digital Signal Processor
102 PCI N/A
102d PCI Hardware echo canceller
102-X PCI Express N/A
102d-X PCI Express Hardware echo canceller
Product Identifier
 
A102d-X PCI Express disassembled
 
A102 PCI
 
 Operating systems
 
  • Windows® 2000, Windows® XP, Windows® 9x, Windows® ME.
  • Linux (all versions, releases and distributions from 1.0 up).
  • FreeBSD, Open BSD, NetBSD.
  • Solaris.
 
 Voice applications
 
  • Asterisk®
  • Yate™
  • CallWeaver™
  • FreeSwitch™
 
 Line protocols
 
Voice CAS, MFC/R2, PRI, ATM, Frame Relay, X.25, HDLC, PPP, SS7, Transparent bit-stream, BSC.
 
 Higher level protocols
 
IP/IPX over Frame Relay/PPP/HDLC/X.25, X.25 over Frame Relay (Annex G), BSC over X.25, SNA over X.25, PPPoE, PPPoA, IP over ATM.
 
 Diagnostic tools
 
WANPIPEMON, SNMP, System logs
 
 T1/E1 Status alarm
 
  • RED: Telco Red Alarm Condition.
  • OOF: Out of Frame.
  • LOS: Receive Loss of Signal.
  • AIS: Alarm Indication Signal.
  • RAI: Remote Alarm Indication (Yellow Alarm).
 
 RJ 45 E1/T1 Pinouts
Pin Signal Pin Signal
1 RTIP 4 TTIP
2 RRING 5 TRING
 
 Certification
 
  • FCC Part 15 Class A, FCC Part 68, CISPR 22, EN 55022, Class A, CIPSR 24, AFIC-2016, IEC 60950.
  • Technical certifications in Russia, Malaysia and Australia.
 
 Production quality
 
ISO 9002
 
 Warranty
 
Five years parts and labour.
 
 Contact information
 
For more information, call toll free in North America 1.866.GoSoTel, direct at 314-787-1800 or email: sales@sotelips.com
www.sotelips.com
 
 

The Sangoma A102 Card: two ports of optimized voice and data over T1, E1, and JI available with Telco-grade hardware echo cancellation.

Part of Sangoma’s award-winning Advanced Flexible Telecommunications product line, the A102 uses the same high-performance PCI or PCI Express interface that providing superior performance in critical systems all over the world.

The A102 supports up to 60 voice calls or 4.096 Mbps of full-duplex data throughput over two T1, E1, or J1 lines.

Take advantage of hardware and software improvements, as soon as they become available. Like all cards in Sangoma’s AFT family, the A102 is field upgradable with crash-proof firmware.

Choose the Sangoma A102D and A102D-X cards with Octasic®’s DSP hardware and certified algorithms to achieve carrier-grade echo cancellation and Voice Quality Enhancement functions on your open source or even proprietary telephone system.

 
Technical specifications
 
  • Two T1/E1 ports with a single PCI or PCI-Express interface optimized for high performance voice and data applications.
  • Mix T1 channel banks and E1 networks with full channel synchronization. TDM clocking mode lets network timing to be passed from a network-connected DS0 to any or all of the other ports, so both T1 and E1 are supported simultaneously.
  • Support for Asterisk®, Yate™, CallWeaver™ and FreeSwitch™ PBX/IVR Projects, as well as other open source and proprietary PBX, Switch, IVR, or VoIP gateway applications.
  • All of Sangoma’s AFT products use the same base PCI interface card. Fully compatible with all commercially available motherboards—proper PCI-standard interrupt sharing without manual tuning.
  • Dimensions: 2U Form factor: 120 mm x 55 mm for use in restricted chassis.
  • Includes high-quality, tested RJ45 cables and short 2U mounting clips for installation in 2U rack-mount servers.
  • Intelligent hardware: Downloadable FPGA programming with multiple operating modes. Add new features related to voice and/or data when they become available.
  • Autosense compatibility with 5V and 3.3V PCI busses.
  • Line decoding: HDB3, AMI, B8ZS.
  • Framing: CRC-4, Non CRC4, ESF, SF, D4T1/E1. Also compatible with Japan’s J1.
  • A102-X and A102D-X PCI Express: 1 Lane PCI Express bus.
  • Power: 800 mA peak, operational 300 mA max at +3.3 V or 5 V.
  • Temperature range: 0–50 °C.
  • 32-bit bus master DMA data exchanges across PCI interface at 132 Mbytes/sec for minimum host processor intervention.
  • Ring buffer DMA handling for minimum host intervention and guaranteed data integrity on high volume systems.
  • Supports Robbed Bit Channel Associated Signaling (CAS) and ISDN PRI.
  • T1/E1 and fractional T1/E1, multiple channel HDLC per line for mixed data/TDM voice applications.
  • Optimized per channel DMA streams and hardware-level HDLC handling unload the host CPU.
  • T1/E1 and fractional T1/E1, multiple channel HDLC per line for mixed data/TDM voice applications.
  • Optimized per channel DMA streams and hardware-level HDLC handling unload the host CPU.
  • Uses raw bitstream interfaces to support arbitrary non-standard line protocols, such as non-byte aligned monosynch or bisynch.
  • WANPIPE® routing stack is completely independent of TDM voice application for total system reliability.
  • WANPIPE® supports certified, field-tested, and reliable Frame Relay, PPP, HDLC, and X.25.

 

 

 

SIP Trunking

SIP Trunking is simply a protocol for voice, video and data. It's a lot like PRI, except that it operates over IP and give you back your bandwidth for other uses when you aren't using it for voice.
Read more...
 

Proud Partners

The Premier IP Communications Conference  SoTel IP Services is a proud partner of Sangoma.

IP Phone Services

A internet connection is needed for you to connect to IP Services. VOIP can integrate with other services, and many different phones can work with the voip service. You get voice mail,call forwarding and many other features with IP Services.

The IP Poll

How are you with IP Phone Technology?
 

Status Center

rss Section 508 css valid xhtml valid